* This is a high quality waterproof inspection Deck plate made of UV stabilized plastic. high quality waterproof inspection Deck plate made of UV stabilized plastic with round textured surface. Structural material stands up to tough service, extreme weather and solvents. Watertight access point without the use of any tools
* Opening Diameter: 4" 6" 8"
* Snap and screw-in style plates. You will need to use silicone waterproof sealants on each of the six screw holes to prevent water from seeping through the holes. Flange has beveled edge, pry-out notch and six countersunk fastener holes. Flange is predrilled for #8 screws.
* Great for access for inspection of and general access to shut off valves or back-fastenings, inspection ports and the ability to clean out compartments

1.  Why does stainless steel have magnetism?

Often, people use magnets to test the quality of stainless steel.   If a magnet doesn't attract and has no magnetism, it is genuine and of good value.   On the contrary, it is regarded as a counterfeit.   In fact, this is an extremely one-sided and unrealistic method of wrong identification.

Austenitic stainless steel is non-magnetic or weakly magnetic.   Martensitic or ferritic stainless steel is magnetic.   However, when austenitic stainless steel undergoes cold working, the microstructure of the processed area will also transform into martensite.   The greater the degree of processing deformation, the more martensitic transformation occurs and the greater the magnetic property.   The material of the product will not change.   More professional methods should be adopted to test the material of stainless steel.   (Spectral detection, stainless steel identification liquid detection).

2.   Why does stainless steel rust?

a. When dust containing other metal elements or particles of dissimilar metals accumulate on the surface of stainless steel, in a humid environment, the condensate water between the adherent and the stainless steel forms a micro-battery, triggering an electrochemical reaction and damaging the protective film.   This is known as electrochemical corrosion.

b. When organic substances such as vegetable juice, noodle soup, and phlegm adhere to the surface of stainless steel, they form organic acids in the presence of water and oxygen.   Over a long period of time, these organic acids will corrode the metal surface.

c. The stainless steel surface adheres to substances containing acids, alkalis and salts (such as splashed alkali water and lime water during wall decoration), causing local corrosion.

d. In polluted air (such as that containing large amounts of sulfides, carbon oxides, and nitrogen oxides), upon encountering condensation water, liquid spots of sulfuric acid, nitric acid, and acetic acid are formed, causing chemical corrosion.